Reman Hohan 6×4 Dump Truck

Reman Hohan Truck Description

• REMAN ROAD truck reman work completely renews the full air‑brake circuit, replacing aging brake chambers, valves and friction linings, then fine‑tunes brake responsiveness for fully‑loaded downhill journeys.
• The heavy‑duty chassis undergoes ultrasonic crack detection, and reinforcement welding is applied to sections that commonly accumulate fatigue stress.

• The dump‑cargo‑box is carefully inspected for impact damage, with high‑wear floor sections thickened to resist abrasion from sharp quarry materials.
• After extended downhill‑simulation braking trials, this reman Hohan dump truck provides stable, secure stopping performance, making it a safe haulage asset.

Specification Table

• Model: Reman Hohan Dump Truck 6×4
• Drive Type: 6×4 heavy‑duty dump truck, dual rear drive axles
• Engine: Remanufactured Sinotruk diesel engine, overhauled with worn parts replaced, power recalibrated
• Transmission: Rebuilt manual gearbox, new seals and bearings, smooth shifting adjusted
• Axles: Steering and rear drive axles overhauled, differential rebuilt, torque balance calibrated
• Chassis Frame: Ultrasonic crack inspection, reinforcement on stress areas, anti‑rust treatment
• Dump Cargo Box: High‑strength steel white tipper body, wear‑resistant floor, anti‑corrosion finish
• Hydraulic Lifting System: Fully renewed lifting pump, cylinder, valves and pipelines, full‑load dumping test passed
• Cab: HOWO NX cabin, interior refreshed, electric circuits and air‑conditioning inspected & tested
• Brake System: Air‑brake system remanufactured, new brake parts, downhill braking calibrated
• Wheels & Tires: Hubs inspected; used or new tires optional
• Suspension: Heavy‑duty leaf‑spring suspension, worn shock absorbers replaced, load balance adjusted
• Electrical System: Wiring checked, warning lamps, lights and instrument panel fully functional
• Pre‑shipment Test: Full‑load dumping, brake simulation, hydraulic leak test and final safety inspection

Standardized Truck Reman Process

• Conduct a full multi‑system diagnostic inspection across engine, gearbox, drive axles, brakes, hydraulics, chassis and cabin, recording every wear defect.
• Fully disassemble the HOWO NX dump truck down to individual spare‑part components, then clean, measure and grade each part for reuse, repair or replacement.
• Carry out deep overhaul on all core powertrain assemblies, renewing worn internal components, seals and bearings before recalibrating engine power and transmission performance.
• Perform ultrasonic crack‑detection on the chassis frame, reinforce fatigue‑stress zones, repair and thicken high‑wear sections of the dump cargo box, then complete anti‑corrosion painting.
• Renew hydraulic lifting, air‑brake, suspension, electrical circuits and cabin accessories, reassemble all components following factory torque‑standard specifications.
• Run full‑load dumping cycle tests, hydraulic pressure‑leakage checks, road‑simulation trials and downhill‑brake‑performance validation.
• Complete the final comprehensive quality audit, compile rebuild documentation and release the truck for shipment only after passing all acceptance criteria.

How To Distinguish Reman Hohan Truck From Refurbished Truck?

• Disassembly scope
  Refurbished truck: Only visible faulty parts are repaired. Core assemblies including engine, gearbox, drive axle and hydraulic system remain closed without inspection.
  Reman Hohan truck: The whole vehicle is fully disassembled down to individual components. Every part is cleaned, measured and graded.
• Internal wear treatment
  Refurbished truck: Hidden internal wear, aging and chassis fatigue risks are left completely untouched.
  Reman Hohan dump truck: All safety‑critical worn‑out components are replaced, powertrain rebuilt and recalibrated.
• Structural inspection
  Refurbished truck: No crack detection or reinforcement work is carried out on the chassis and cargo box.
  Reman Hohan truck: Chassis undergoes crack detection, and stress‑prone areas get structural reinforcement.
• Performance test standard
  Refurbished truck: Only simple functional check, no heavy‑load simulation test. Sudden breakdowns are very likely under heavy‑duty working conditions.
  Remanufactured truck: Multi‑stage heavy‑load performance tests are completed before delivery.
• Documentation & traceability
  Refurbished truck: No detailed restoration records are provided.
  Remanufactured truck: Complete rebuild documentation is available for full traceability.
• Final reliability level
  Refurbished truck: Looks new on appearance, but carries major long‑term operational risks.
  Reman Hohan truck: Restores near‑new‑level reliability for stable heavy‑duty performance.

Full‑Lifecycle Cost‑Comparison

• Brand New Dump Truck
  The highest upfront purchase price, zero initial mechanical wear and full factory warranty. New dump‑trucks suffer heavy depreciation immediately after entering construction‑site operation, occupying large amounts of capital funds and creating the highest total‑lifecycle cost for fleet operators.
• Second Hand Dump Truck
  Low initial buying price, yet completely unknown internal wear conditions on engine, axles, hydraulics and brakes. Sudden failures often occur during heavy‑load hauling, triggering expensive emergency repairs and work‑site downtime losses. Hidden long‑term costs frequently exceed the initial purchase savings.
• Refurbished Dump Truck
  Moderate‑low acquisition cost, fresh exterior paint and simple visible‑fault repairs only. Core internal assemblies retain accumulated wear from previous operation, leading to high mid‑term breakdown risk. Remaining usable service life is short, offering poor long‑term economic benefits.
• Reman Hohan Truck
  Balanced, moderate‑level upfront investment. Every high‑value core assembly is fully overhauled, hidden wear risks eliminated and multi‑stage heavy‑load testing completed. Unplanned repair expenses and downtime losses are minimized, residual resale value remains stable, delivering the lowest total‑cost‑of‑ownership for medium‑and‑long‑term construction‑fleet projects.

RFQ

• Q: Which key components are replaced with brand‑new spare parts, and which ones are repaired and reused during remanufacturing?
  A: We will deliver a full reman parts replacement checklist. Safety‑critical worn‑out components will be changed to new spare parts, qualified reusable parts will be overhauled, cleaned and tested before reassembly.
• Q: Has the main chassis frame been inspected for cracks? What inspection method you use, and whether you carry out reinforcement welding on fatigue areas?
  A: Each chassis frame goes through ultrasonic crack detection. Fatigue‑stress zones will be reinforced if defects are found, and the inspection report can be provided.
• Q: Which exact wear‑parts should we stock locally in advance if we deploy this reman truck to a remote worksite far from spare‑part suppliers?
  A: After order confirmation, we will send you a custom‑tailored critical‑wear‑parts checklist including brake linings, hydraulic seals, filter elements and suspension components.
• Q: Is it possible to upgrade the cabin configuration during remanufacturing, such as adding extra seats or improved interior comfort features?
  A: Limited cabin custom‑upgrades are available. Send over your specific modification requirements, and we will prepare a separate quotation for your requested changes.
• Q: What kinds of defects will be covered under your reman warranty, and which conditions are excluded from warranty protection?
  A: Our warranty covers manufacturing defects on rebuilt powertrain, hydraulic and brake assemblies. Damage caused by overloading, improper operation or poor site maintenance is not included; full warranty terms will be listed inside our formal quotation.